• Address: Durotech Industries, 14 Essex Street Minto NSW 2566 Australia
  • Phone: 02 9603 1177

Durotech 007FC

Durotech 007FC is a Class 3 fast curing water based and micro fibre reinforced hybrid waterproofing membrane which provides excellent flexibility and crack bridging capability. It is a 2-coat system to be applied over primed “porous & non-porous” substrates for internal and external under tile applications. Read More


    • Fast drying. Recoat in 2 hours @ 22⁰C & 50% RH
    • Flood test after 24 hours @ 22⁰C & 50% RH
    • Can be tiled over after 4-6 hours @ 22⁰C & 50% RH in non-critical areas
    • Class III, high elasticity as per AS/NZS 4858 Wet Area Membranes
    • Water-based, pre-mixed -ready and easy to use and easy clean up
    • Environmentally friendly –LOW VOC and free of respirable silica
    • For commercial and residential internal/external wet areas, balconies, decks and other areas that will be tiled over

Area Used

    • As a waterproofing membrane under tile to internal wet area shower, bathroom, kitchen, laundry and toilet areas when installed according to AS/NZ 3740
    • Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard; and structural plywood (Type A Stamped “PAA JAS-ANZ” to AS/NZS 2269- 2004) substrates